***Now available with a solid bushing on the right rear bushing for use in GNs. No heat shield required***
The arms have a larger upper ball joint that requires the spindle be reamed to fit. They have teflon bushings. I will ream your spindles for free with the purchase of a pair of upper arms. .
These are not the common off the shelf Circle track arms they are built for me for B-body spindles and not the stock G-body spindle.
Price$270
Pair of arms and bare 11" or 12" spindles $350
Click here for pics of the arms installed on a Monte Carlo.
12" brake kit and upper control arms
2 upper control arms
2 ball joints
2 outer wheel bearings
2 inner wheel bearings
2 grease seals
2 refurbished/modified Spindles
2 rebuilt calipers
2 1LE Rotors
4 Caliper bolts
4 Pads
2 dust shields New
2 spindle nuts
2 spindle washers New
Price $720
Shipping weight. There are two 60lb boxes from 76179.
I can supply the kit without upper arms for those who have 64-72 or 78-88 if you are using one of the other arms that is available out there. For the kit without upper arms and without reamed spindles the price is $470.
Pad Upgrade
1.1 Performance Friction pads
add E-mail for price
1.2 Performance Friction Z rated pads $39
Suspension Addition
Idler arm
Drag link
2 outer tie rods
2 inner tie rods
2 adjuster sleeves
2 lower ball joints
Add $145 to package price
Master Cylinders
New Master cyl for 12" brakes $75
Reman master cyl for 12" brakes $35
Terms
*These kits are made on an as needed basis so it may take a week for your kit to ship after i have recieved payment. *
Shiping is $55 to most of the continental US. The east and west coast (AK as well) might be slightly higher.
Prices subject to change without notice.
Order
©2001,2002,2003. All Rights Reserved.